Photographs of installations from RPG Europe.
-
Auditonis Poland Project
10 images
Custom made RPG QRD, each a slightly different size to follow the line of the auditorium, custom made ceiling panels, and a supply and install service, even in poland!
-
-
Bridge Academy Project
13 images
Bridge Academy Acoustic products fitted: RPG Waveform Spline, RPG Absorbers and RPG BAD panels.
-
Burlington Danes Academy Project
20 images
Burlington Danes Academy Performing Arts Centre Critical music spaces such as Performing Arts Centers benefit more from RPG Acoustic Products and a more sophisticated acoustic design of diffusion and reflection rather than just normal absorption. Built by Durtnells, the acoustic package was supplied and installed by us after lengthy discussions with BH&M Architects, Matt Weyham provided a design based on the acoustic report of Sandy Brown Associates, we produced the panels in the colours and to the sizes required. Acoustic products fitted: RPG Flutterfree, RPG Absorbers, RPG Biffusors, RPG Waveform Monoradial
-
Casa Da Musica Project
9 images
Designed by Reme Koolhaas and OMA Architects, the QRD734 were manufactured from Pine boards of the clients specification, with folded wells for increased bandwidth with a shallower footprint. Many of the panels were made with cutouts while others had special metal paint finishes.
-
Clipso Projects & Products
42 images
Clipso stretch fabric system for wall and ceilings Fully printable Easy installation Acoustic
-
-
Hayesfield School Project
17 images
Hayesfield School RPG Soundtrac, RPG Flutterfree T and RPG QRD734 all supplied and installed in this fantastic looking school performance space. The QRD734 where oak veneered with paint finish in the clients chosen RAL colour. Acoustic products fitted: RPG Flutterfree T, RPG Soundtrac, RPG QRD734
-
Home Cinema Project
20 images
Private Home Cinema Acoustic design and manufacture of panels for this project, with custom acoustic fabrics, bespoke panel sizes and lots of design work! Acoustic products fitted: RPG Absorbers, RPG BAD Panels
-
Home Cinema Projects
7 images
A variety of home cinema projects featuring all acoustic RPG products.
-
Monkton Combe School Project
46 images
Monkton Combe School is situated in a stunning rural location on the outskirts of Bath in Somerset. The independent School had just completed a £3.2m new build, a specially designed music centre on two floors with several practice rooms, recording studio, music teaching classroom and a 100 seater rehearsal hall for performances. The focus was to reduce noise whilst increasing sound quality in the music rooms and rehearsal hall, whilst embracing the visually appealing design of the new building. Acoustic GRG Products Ltd manufactured and installed a wide range of RPG products including Flutterfree T, QRD734, Biffusers.
-
-
Printed RPG Absorbers
33 images
RPG Absorbers can be digitally printed with any image supplied by our clients. This gallery displays examples of our digitally printed absorbers.
-
RAF Northolt Project
21 images
RAF Northolt Nick Durap of Sharps Redmore designed both rehearsal rooms using RPG Product data to model the rooms, the final rooms were then tested to see how close the modelling was. Nick was very pleased with the results!. Vinci Construction were the main contractors. Acoustic products fitted: RPG Skylines, RPG Modffusors, RPG Absorbers, Stretch Fabric Lining
-
-
RPG Diffusors
70 images
Installations featuring RPG QRD734, DFR72, RPG Modffusor, RPG Skyline and other RPG diffusion products
-
Surface Design Show 2015
88 images
Once again we will be exhibiting at the SD Show with our usual vibrant display of acoustic products. This year we have NEW Panno acoustic timber to showcase as well as NEW product finishes to introduce too. Do come along we are on Stand 122.
-
Church Studios Project
68 images
Paul Epworth's renovation of The Church Studios London was completed in 2014. Some of our acoustic products were specified to kit out the studios. Studio 1: RPG BAD Panels Studio 2 & 3: RPG BAD Expo in white & Spigo acoustic panels in white. Photos by Adam Coupe Photography
-
Thomas Deacon Academy Project
21 images
Thomas Deacon Academy Acoustic products fitted: RPG BAD panels, RPG Absorbers, RPG Waveform Opticurve and the BaswaPhon system
-
University of Bedfordshire Project
24 images
The University of Bedforshire, designed by RMJM and built by Kier Marriot, with the acoustic design by Sharps Redmore. RPG Europe supplied and fitted all products including: Slotted timber planks, RPG Absorbers and stretch fabric walls.
-
Winchester College Project
78 images
RPG products specified for the college which was custom designed especially for the project. Products used: RPG Absorbers, RPG Pyramids, RPG Flutterfree, Curved Monoradials, RPG Waveform Harmonix. Photos by Adam Coupe Photography
-
Winchester School of Art Project
41 images
Clipso & Spigo were specified for this school project. A Clipso ceiling system with incorporated lights and a wall of Clipso stretch fabric system was used all finished in dark grey. Spigo acoustic wood panels finished in white were installed in the hall.
-
WSDG Project
3 images
WSDG - Philippe Moritz Switzerland Control room and practice room fitted with RPG products
-
-
-
-
Nottingham Trent University
19 images
Project: Nottingham Trent University - Clifton Campus Architect: Evans Vettori Contractor: GF Tomlinson Acoustic Consultants: Acoustic Design Technology Ltd Acoustic Products & Installation Team: Acoustic GRG Photos: Adam Coupe Photography Our team designed and manufactured a range of acoustic products to compliment the design of the new Pavilion building and lecture theatres and classrooms at the newly built Clifton Campus at Nottingham Trent University. Pavilion Building: Our team custom made Ash slatted acoustic timber balustrade on a modular wood frame system in-corporating Absorber panels covered in Camira fabric to form bespoke panelling, which was then installed by our team. For the upper work seating area in the Pavilion, RPG Absorber panels in Camira fabric were custom made and fitted with magnet fittings with Z bars to clear cable trays on all the high level metal beams and installed by our team. Main Lecture Theatres No. 1,2,& 3: Lambri acoustic timber slotted panelling in Blond Ash finish was installed on the walls incorporating vent grills, with custom made ceiling fins consisting of Lambri Blond Ash over acoustic absorption. Main Teaching Block - Classrooms In the many classrooms, our acoustic stretch fabric track system, Soundtrac, was installed high on the perimeter of the walls in a Grey finish.
-
Surface Design Awards Winner 2016
12 images
Acoustic GRG are delighted to announce our acoustic project has won The Public Building Interior Surface category at The Surface Design Show 2016. Project: Winchester School of Art at The Southampton University Our team of installers constructed the Clipso ceiling & wall panels as well as installing a range of acoustic wood panelling from the Spigo Group. We will be once again exhibiting acoustic products at The Surface Design Show in 2016, Stand 128. #SDS16
-
Ibstock Place School Project
9 images
Project: Ibstock Place School. Architect: BHM. Contractor: LifeBuild Solutions Ltd. Acoustic Products & Installation: Acoustic GRG. Photos: Adam Coupe Photography. A selection of our acoustic wood products were specified for the new development at Ibstock Place School and installed by our team. The new Theatre features our RPG Flutterfree T Oak in matt lacquered finish, this is used on ground floor walls up to 4m, as well as the balcony, orchestra lift and proscenium. On the First Floor viewing gallery we installed new Lambri Microperforated Timber wall panels, with fine microperforated oak veneer finish, we also provided the same microperforated veneer over plain board to match the finish around the windows. On the second floor and in the drama studio we have installed Soundtrac Stretch fabric panels in Blue. The ceiling features RPG Waveform Monoradials finished in Oak, incorporating spotlights. All of these products were installed by our team.
-
Putney High School Project
9 images
Project: Putney High School Architect: Shepheard Epstein Hunter Contractor: ITC Concepts Ltd Acoustic Products & Installation: Acoustic GRG Photos: Adam Coupe Photography A selection of our acoustic wood products were specified for the new performing arts centre at Putney High School and installed by our team. For the side walls, we installed our Soundtrac stretch system with Cara fabric, and fitted bespoke QRD panels finished in Oak on brackets to make them reversible, allowing the user to vary the acoustics of the room. The upper level balconies are clad in our new modular timber panels, 25mm fabric covered panels with real oak strips mounted on the face, factory finished for quick site installation. The stage has Oak Diffractals on the side walls, mounted in series to give a seamless appearance to the array. The rear wall behind the seating features fabric wrapped panels, finished in the clients own choice of fabric. All products installed by our team of installers.
-
Haberdashers Aske's Boys School
9 images
BH&M architects wanted to create a visually stunning but acoustically effective feature ceiling for this high profile building and Haberdashers Askes Boys School in Elstree. The original scheme was for large circles, traditionally the design would only have been realised using suspended ceiling rafts or by making plasterboard rafts, both of these methods would have been heavy, visually compromised and not befitting of such a prestigious project. John Amann, the architect for the project at the design stage, asked Acoustic GRG if we could suggest a solution – we suggested Clipso. The rafts are are manufactured using Clipso wide format fabrics and the Clipso aluminium frame sections. The framing forms the large circles, while the 5m wide fabric allowed us to make rafts in 1 piece. We used a combination of 5m, 4m, 3m and 2m wide sections and suspended them at the required heights, this allowed the architects original design to be realised in a cost effective, lightweight and high performance panel system. Constructed on site and Installed by our team of installers - Quietwall. Photos by Adam Coupe Photography.
-
Surface Design Show 2016
13 images
Acoustic GRG once again displayed our usual vibrant display of acoustic panels. This year we were also delighted to showcase Lifeboard a new powder coating service for engineered wood. Our acoustic panel RPG Harmonix was featured in The Surface Spotlight feature at the show and discussed in a presentation. We also won a Surface Design Award in the category - Public Building Interior Surface for our project at The Winchester School of Art.
-
City Gates Church
27 images
A selection of acoustic products manufactured in our Kent workshop and installed by our team. Products include: Birch ply RPG Planaform ceiling reflectors, fabric wrapped RPG Absorbors for the stage and conference room and Spigo acoustic wood for the balustrade. Project photos by Adam Coupe Photography Ltd.
-
Rebekah Hutchinson Designs
5 images
Fascinated by colour and texture, Rebekah Hutchinson creates bespoke wall coverings/ wall art. With a strong focus on energy and movement, her work expresses a sense of mindfulness, allowing people to slow down, free their minds and experience the present moment. Rebekah embraces the natural colours, textures and patterns of materials using two main techniques, which comprise of laser-rastering and UV printing. These techniques are combined to create surfaces that have both visually and tactile appeal. Acoustic GRG are delighted to work with Rebekah to offer a custom made Absorber featuring Rebekah's design.
-
Anna Gravelle Designs
11 images
Anna is a Bristol based designer with a reputation for creating stylish and innovative fabrics and architectural surfaces using printed pattern and surface embellishment. Texture is at the heart of her design process with the aim of creating a beguiling and tactile experience within domestic interiors and public settings. New for September Acoustic GRG are delighted to announce our collaboration with Anna to bring luxury acoustic panels to the interior market.
-
Green Glue
1 image
Green Glue is a visco-elastic damping compound designed to use between 2 sheets of drywall to substantially increase the performance of a standard stud wall, or to retrofit to existing walls to help reduce noise levels coming in and going out of room it is installed in. Green Glue works by raising the mass of a structure, which in turn lowers the resonance point, these combined help to reduce the levels of vibration that are transmitted into the wall or ceiling. Typical values for a steel stud partition show that a Green Glue installation will give 8dB increase in Rw and an Rw+Ctr increase of 9dB over a standard steel stud install. Using Green Glue in combination with Resilient Channel increases the performance of the assembly while limiting the damage down by short-circuiting the RC, used on block walls this system can give a reduction of 8dB. Green Glue is available from our webshop www.allacoustics.co.uk